
1. Technology overview
hibot is a robotics venture from the Tokyo Institute of Technology, based in Shinagawa, Tokyo. It builds inspection robots for the power, oil, gas and chemical industries and offers the HiBox data platform for predictive maintenance.
SQUID inspects boiler tubes from the inside using ultrasonic thickness mapping with 24 channels. The robot enters through the header and travels up to 40 m into water tubes of 50 to 68.2 mm inner diameter, producing a continuous wall thickness map. A newer version also maps steam heating coils inside live storage tanks through the two existing flanges.
2. Highlighted features & specifications
- Boiler tube inspection: ultrasonic thickness mapping from inside the tube at up to 100 mm/s.
- 24 UT channels: circumferential resolution of 15 degrees and inspection pitch from 5 mm.
- Long reach: maximum inspection distance of 40 m, with bends from 1D R45 accepted.
- Tank heating coil mode: maps about 60 to 70 m of coil in roughly 40 minutes.
- Three modules: sensor module, reel module and pump unit.
- HiBox integration: on-site data processing, report generation and comparison with past inspections.
3. Potential application
Water tube inspection at thermal and biomass boilers in Vietnam. Heating coil checks in oil and chemical storage tanks without draining. Waste heat recovery boilers at waste-to-energy and industrial plants.
4. Benefits
Inspection without confined-space entry, with a single crew and trailer. Continuous thickness data at 5 mm pitch instead of spot readings. In a US Gulf Coast pilot, 7 storage tanks and 330 m of coil were mapped with no tank entries. Results work with HiBox for on-site reports and comparison with past inspections.
5. Market trends & opportunities
Boiler and heating coil failures from corrosion are costly, and plant owners increasingly want inspection without scaffolding or confined-space entry. Vietnam has growing thermal, biomass and waste-to-energy capacity and many oil and chemical storage tanks that need periodic wall thickness checks.
6. Other information
hibot is based in Shinagawa, Tokyo, with a founding date of April 2004 given in its own press release. It signed a distribution agreement with Donegani Anticorrosione for Italy in January 2025, and its snake-type robot Soryu-C was used by A2A for an Italian district heating inspection in 2023.
One platform connecting startups, corporations, research institutions, regions and investors











Playbook & Handbook · February 6, 2026
Winning Accelerator Playbook 2026 by BambuUP
RETAIL E-COMMERCE: AI AND REAL-TIME DATA ARE TRANSFORMING HOW RETAIL BUSINESSES OPERATE








































